Glutinous rice

BPI Ri 1 (BPI Ri1) Rice Variety: Yield, Maturity and Characteristics

BPI Ri 1 is a glutinous inbred rice variety for irrigated lowland, known locally as BPI Ri1. It was released in 1979. It matures in about 120 days and averages 4.3 tonnes per hectare.

4 min read Updated October 17, 2026 By the anee.io agriculture team Read it all with Libre + Anee
An irrigated palay field in the Philippines, where BPI Ri 1 is meant to grow

The average and top yields in tonnes per hectare come from the trials each variety went through to be registered with the NSIC, and from what the seed companies say about their own seed.

What farmers harvest today can be different. Newer harvest records, the season, the place, the soil, the water and the care all move these numbers over time.

So use them to compare varieties, not as a promise for your field. Ask your seller or your agriculturist how the variety did on farms near you in the last few seasons.

If you came here looking for rice variety 1, or Rc 1, this is the one. Compare it with the other varieties in our rice variety finder before you buy seed. Also read our guide to rice varieties in the Philippines for how inbreds, hybrids and special rice differ.

  • Maturity: about 120 days after sowing.
  • Yield: 4.3 tonnes per hectare on average, or about 86 cavans of 50 kilograms.
  • Season: Dry season and wet season.
  • Holds up against: rice blast, bacterial leaf blight, tungro.

Key facts about BPI Ri 1

Key facts of BPI Ri 1 (t/ha means tonnes per hectare)
TraitValue
Year approved1979
Local nameBPI Ri1
TypeGlutinous inbred
Growing environmentIrrigated lowland
Recommended seasonDry season and wet season
How to plant itDry direct seeded, transplanted, wet direct seeded
Recommended forThe whole country
Maturity120 days after sowing
Average yield4.3 t/ha
Plant height91 cm

How much does BPI Ri 1 yield?

On average it gives 4.3 tonnes per hectare. That is about 86 cavans of 50 kilograms of palay. It sits below the average of the 118 irrigated lowland inbreds on the list, which is 5.2 tonnes. So plan your costs on the average, then work toward the top with the habits in our guide to raising rice yield per hectare.

How many days does it take to mature?

It takes about 120 days from sowing to harvest. Varieties of 100 to 120 days count as short duration and 120 to 140 days as medium, so this one counts as short duration. Then harvest when 85 to 90 percent of the grains turn golden yellow. Because the day count drives every task, anee.io counts it for you from each lot's own planting day, with the growth stages and weather beside it.

Is it resistant to pests and diseases?

Reactions in trials: R resistant, MR moderately resistant, I intermediate, MS moderately susceptible, S susceptible. Some carry a second rating in brackets.
Pest or diseaseRatingWhat it means
Rice blastResistantHeld up well in the tests
Bacterial leaf blightResistantHeld up well in the tests
TungroResistantHeld up well in the tests

It showed no weak spot in its ratings. Still, a resistant variety can break down when a new strain of a disease or a new pest population comes. So keep scouting, and use our pest and disease finders when something looks wrong.

Where should you plant it?

It suits irrigated lowland, where you control the water. Level the field well so the water stands evenly, and plant together with the farms around you, so pests cannot move from field to field. Our guide to rice land preparation shows each step. It is recommended for the dry season and the wet season. You can plant it dry direct seeded, transplanted or wet direct seeded. For the right month in your province, see the best time to plant rice.

Plan your next season of BPI Ri 1

Set the planting day of each lot and anee.io dates every task to harvest, with the weather beside it. Free on the Libre plan.

Start free

Varieties like this one

These come from the same kind of farm and grow about as long. So if seed of this one is hard to find, compare these first.

  • NSIC Rc 13: 120 days, 4.7 tonnes per hectare on average, 2004
  • NSIC Rc 484SR: 121 days, 4 tonnes per hectare on average, 2017
  • NSIC Rc 218SR: 120 days, 3.8 tonnes per hectare on average, 2009
  • NSIC Rc 21SR: 122 days, 4.5 tonnes per hectare on average, 2011
What is the local name of BPI Ri 1?
It is known as BPI Ri1. Seed sellers and agriculturists use both names, so ask for either one.
How many days does BPI Ri 1 take to harvest?
About 120 days after sowing. Then harvest when 85 to 90 percent of the grains are golden yellow.
What is the average yield of BPI Ri 1?
It averages 4.3 tonnes per hectare, about 86 cavans of 50 kilograms. Your own yield depends on water, seed, fertilizer and timing.
In which season should I plant it?
It is recommended for the dry season and the wet season. Then pick the month with our planting calendar guide and the forecast for your town.
Is this variety a hybrid?
No, it is an inbred. So the seed you buy grows true, but certified seed still gives the best start.
Where can I buy certified seed of this variety?
Ask accredited seed growers in your province or your municipal agriculturist. Look for the certified seed tag on the sack before you pay.

See how BPI Ri 1 will do on your farm

With Libre + Anee, see its full record: how it yields, its strengths and weaknesses against pests, diseases and the weather, and whether it fits your farm, your season and your soil.

The account is free, no credit card.