Crop Yield: What It Means, How to Measure It and How to Raise It
Crop yield is the amount of harvest you get from a given area, usually written as tons or cavans per hectare. It is the simplest measure of how well a season went. For palay, the national average sits around 4 tons per hectare, while well managed irrigated farms often reach 5 to 6 tons or more. This guide shows how to measure your own crop yield and where the extra cavans usually hide.
Most farmers know their harvest in sacks, but fewer know their yield per hectare. Yet that one number tells you whether a new variety, fertilizer plan or planting date actually worked.
This guide explains what crop yield means, how to measure it fairly, how to compare it, and what raises it. For forecasting a harvest before it comes in, see crop yield forecasting.
What crop yield means
Yield is harvest divided by area. If a 2 hectare farm gives 10 tons of palay, its yield is 5 tons per hectare. Writing it per hectare lets you compare a small lot with a big one, and this season with the last.
For palay, many farmers count in cavans. A cavan of palay is usually taken as 50 kilograms, so 100 cavans per hectare equals 5 tons per hectare.
| Cavans per hectare | Tons per hectare |
|---|---|
| 60 | 3.0 |
| 80 | 4.0 |
| 100 | 5.0 |
| 120 | 6.0 |
How to measure crop yield with a crop cut
You do not need to weigh the whole field to know your yield. A crop cut, done carefully, gives a good estimate a few days before harvest.
Mark sample areas
Pick three spots that look average, not the best or worst. Mark an area of 5 square meters in each, for example 2.5 by 2 meters.
Harvest and thresh
Cut all the plants inside each area, thresh them, and clean the grain.
Weigh and check moisture
Weigh the grain from each area and note its moisture. Fresh palay is often above 20 percent moisture.
Adjust to 14 percent moisture
Multiply the weight by (100 minus the moisture) and divide by 86. That gives the weight at 14 percent moisture, the usual standard for dry palay.
Scale to a hectare
Average the three areas and multiply by 2,000, because a hectare holds 2,000 areas of 5 square meters. The answer is kilograms per hectare.
For example, say an average 5 square meter area gives 3 kilograms of palay at 22 percent moisture. First, 3 times 78 divided by 86 is about 2.7 kilograms at 14 percent. Then 2.7 times 2,000 is about 5,400 kilograms, or 5.4 tons per hectare.
Why your yield differs from your neighbor's
- Variety: some varieties simply carry more grain. See the best rice variety for your area.
- Planting date: heat or drought at flowering empties grains. See when fertilization occurs.
- Fertilizer: the right amount at the right stage. See fertilizer timing by growth stage.
- Water: stress at tillering and flowering costs the most.
- Pests, diseases and weeds: each takes a share, and together they take a lot.
- Harvest and drying losses: late harvest and slow drying lose grain after it has grown. See palay drying.
How to raise crop yield
Big jumps rarely come from one new product. They come from fixing the weakest link, then the next one. Start with the steps that cost little: good seed, a level field, timely weeding and fertilizer on the right days.
Our guides on increasing rice yield per hectare and increasing corn yield per hectare go through each step for those crops. For vegetables, see vegetable farming.
A higher yield that costs more to grow may earn less. Track your cost per kilogram as well as your yield per hectare. Our guide on farm profitability explains how.
Can anee.io raise your crop yield?
Yes. Most lost cavans come from tasks done late or forgotten, and anee.io keeps every task on its day. The cropping calendar dates each fertilizer, spray and irrigation from each lot's planting day. Harvest records store the yield of every lot, and the reports set your yield beside your costs. Compare Reports then shows season against season, so you see what worked. Read can anee.io increase my yield for how it all fits.
Log each lot's harvest, see your yield and cost per hectare, and compare season after season.
See harvest records